Apply one percent change after another and see the final value and the net percent change. Start with 100, add 10%, then take off 10%: 100 → 110 → 99, a net change of −1%, not 0%.
Each percent is taken of the result of the step before it, so the changes multiply instead of adding. For interest over time use the compound interest calculator; for a single change between two numbers use the percentage change calculator.
Enter a starting value, then each percent change in order. Use a minus sign for a decrease (−10 for 10% off). Each change applies to the result of the one before it.
Final value: 99
Net percent change: -1%
100 → 110 → 99: net change -1%.
| Step | Before | Change | × Factor | After |
|---|---|---|---|---|
| 1 | 100 | +10% | 1.1 | 110 |
| 2 | 110 | -10% | 0.9 | 99 |
Same result as one change of -1%. The changes do not simply add up, because each percent is taken of a different amount.
To get back to the start after the first change, you would need -9.0909%, not the opposite percent.
Explain the steps with AIStart with 100, increase by 10%, then decrease the result by 10%.
99, a net change of −1%. The 10% decrease is taken of the larger 110.
A $100 item is marked 20% off, and a coupon takes 10% off the sale price.
$72, which is 28% off, not 30% off.
Start with 200 and apply +20%, then −10%, then +5%.
226.8, a net change of +13.4% (1.2 × 0.9 × 1.05 = 1.134).
Turn each percent p into a factor 1 + p/100: +10% is 1.10, −10% is 0.90, +25% is 1.25, and 20% off is 0.80. Multiply the starting value by every factor, in any order:
final = start × (1 + p₁/100) × (1 + p₂/100) × … × (1 + pₙ/100)
The net percent change is (final ÷ start − 1) × 100. Do not add the percents: that only works for changes that apply to the same base amount. Because the factors multiply, +x% then −x% always ends below the start, by x²/100 percent of it.
This calculator uses exact decimal arithmetic, so 100 → +10% → −10% gives exactly 99, and results are shown to up to four decimal places.
Press Explain the steps with AI under any answer and the MathAI GPT math solver opens with your numbers already filled in, then explains the method line by line and answers follow-up questions. You can also type or photograph the whole question. On your phone, use MathAI GPT for iPhone or MathAI GPT for Android.
A compound (or successive) percentage applies one percent change after another, each to the result of the previous one. Instead of adding the percents, you multiply the factors: final = start × (1 + p₁/100) × (1 + p₂/100) × … For example, +10% then +10% on 100 gives 100 × 1.1 × 1.1 = 121, which is +21%, not +20%.
The second percent is taken of a different amount. 100 + 10% = 110, and 10% of 110 is 11, so the result is 110 − 11 = 99. Equivalently 1.1 × 0.9 = 0.99, a net change of −1%. To undo +10% you need −9.0909% (1 ÷ 1.1 − 1), not −10%.
Multiply the factors and subtract 1. For +20%, −10% and +5%: 1.2 × 0.9 × 1.05 = 1.134, so the net change is +13.4%. Multiplying works for any number of changes, in any order, so the order of the percents does not change the final value.
No. 20% off then 10% off multiplies 0.8 × 0.9 = 0.72, so you pay 72% of the price, which is 28% off. The second discount applies to the already reduced price, so stacked discounts are always a little smaller than their sum.
Compound interest repeats one rate over time (years, months) with a compounding schedule and possibly deposits. This calculator chains any list of different percent changes, such as +10%, −10%, +25%, with no time period. If you only have one change between two numbers, use the percentage change or percentage increase calculator.
An increase can be any size: +200% multiplies by 3. A decrease cannot exceed 100%, because −100% already takes the value to 0, and anything below that would make the value negative. The calculator accepts increases of any size and decreases up to −100%.